AW Devices

Flying Pads Set Up

Elevators System Set Up Instructions

When buying this system a folder named "Elevator system for three-storey building" is created in your inventory, inside this folder you will find all the items the system consists of. In other words:

- 3 elevators to go up with a notecard and a script inside (mod, no copy, trans)

- 3 elevators to go down with a notecard and a script inside (mod, no copy, trans)

- 2 different models elevator's pad stand (mod, copy, no trans)

- 1 warning display (mod, copy, trans)

- This instructions notecard

- The same note in Spanish

- One script that creates the text you could see over the box you purchased, you can delete it

To Install the system follow this steps:

1. Go to the place where you are going to install the GO UP elevator. It is not necessary to make a hole in the roof over it (1st floor ground). The elevator goes trough the walls.

2. (Optional) Take out (rez) the warning display and place it in the floor o wherever to want, you can copy it, i mean, there will always be a copy of it in your inventory.

3. (Optional) Take out the elevator's stand and leave it in the exact place, later you will place the elevator pad over it. You can modify it to fix it to your needs o just don't use it. You can make copies of it as well.

4. Take out the first elevator pad and place it in the exact place where you will use it and at a height over the floor of around 0.6 or 0.7 meters. Once installed the elevator will always come back to this position after bringing you to the upper or lower floor. Inside the elevator's inventory you will find a Notecard that you will have to use to adjust the movements of the elevator pad.

4a - HOW TO CHANGE THE VALUES OF THE CONFIGURATION

- Right click in the elevator pad

- Edit

- Content tab

- Double click "parametros" notecard

- Follow the instructions you will find in that notecard and change the values to your needs

WARNING: DON'T USE DISTANCES BIGGER THAN 10 METERS FOR THE FIRST (X & Y) AND THE THIRD (X & Y)ADVANCES . IF YOU NEED TO MOVE THE ELEVATOR MORE THAN 10 METERS IN ANY OF THESE DIRECTIONS GET IN TOUCH WITH AZUL WILDER IN ORDER TO ADJUST THE SCRIPT.

THE SECOND MOVEMENT (HEIGHT) ACCEPTS MORE THAN 10 METERS DISTANCES.

- Save it

- Close it

5. Try the first elevator and (if needed) repeat the step 4a until you get the elevator working accurately. If when you sit on the elevator (right click and SUBIR or BAJAR ) the position of your avatar is not correctly oriented, you just edit the elevator and change the value of Z rotation in the Object tab.

6. Take out (rez) the next elevator and proceed in the same way by following the 1 to 5 steps above.

By following these recommendations you will get your elevators installed and running smoothly. Even if by following these steps or not, you don't get to install the system correctly, you can take in contract the installation at the price of $L 100.

If you have any question, you can always IM Azul Wilder.

Azul Wilder.